As the midmorning sun washed over Van Nuys Airport, a tech company CEO exited her car and strode toward the 2008 super-midsize jet her broker had found. He had called it a fine example, and from the ramp it looked like one.
From the CEO's perspective, the jet was pristine. She had viewed the listing, and the aircraft had the desired equipment and amenities. She visualized herself conducting business with clients and colleagues while her pilot flew to their next destination.
As the CEO knew from her business dealings, things aren't always as they seem. The engines or APU could have abnormalities, or maybe the avionics weren't up to speed. And her team hadn't seen the logbooks yet (the proverbial "peek under the hood"), which often tell a different story than a jet's ramp appeal.
Enter the pre-buy, one of the most important steps of a used airplane transaction. And while no transaction, down to a Piper Cub, should go through without one, the stakes are much higher on a multimillion-dollar jet, where one engine or corrosion finding can swing the deal by six or seven figures.
An aircraft pre-buy inspection, also called a pre-purchase inspection, is an independent check of a used aircraft's records and physical condition before the sale closes. Its findings often decide whether the deal closes at the agreed price, gets repriced, or falls apart.
Three questions to answer before making an offer
Before a buyer makes an offer, they should consider three issues. First, they should determine if the business jet's capabilities enable it to adequately fulfill the buyer's mission. Alternatively, an aircraft that exceeds the buyer's requirements could result in higher-than-necessary purchase and operating costs.
Next, buyers should consider the aircraft's maintenance and operational landscape. A seemingly well-priced aircraft with a sketchy maintenance history and uncertain parts availability should raise a red flag. The airplane's damage history, lack of an engine program, and a looming major inspection could present even bigger concerns.
As with other big-ticket purchases, buyers should obtain applicable financing before making a formal offer. Besides the aircraft's purchase price, operational costs need to be considered, including hangar rent, fuel, maintenance, and insurance premiums. Crew salaries represent an additional expenditure.
The records that matter most in a pre-buy inspection
Every pre-buy inspection should cover the same major points listed below. During the process, the inspector may uncover an assortment of minor problems and administrative issues. Occasionally, certain items can significantly impact the purchase transaction. Some findings may be easily resolved while others raise concerns about the aircraft's overall operation and maintenance protocols. Abnormalities require further investigation and have the potential to sink the transaction.
Beyond the metal, a business jet's records provide an in-depth look at the aircraft's operational and maintenance history. For pre-buy inspection purposes, certain records are especially significant.
Aircraft title, registration, and airworthiness certificates: A records search should ideally produce a clean title without active liens or encumbrances. The aircraft should also possess a verified continuous U.S. (or other national) registry and an active standard Airworthiness Certificate.
Weight and balance documentation: The aircraft's updated baseline weight and balance sheet must be accompanied by the calibrated equipment list. Both documents must be paired to ensure payload accuracy and legal configuration. Physically modifying the aircraft will change both documents' characteristics.
Airframe, engine, and APU logbooks: The records should display continuity from the aircraft's origin until present. The inspector is searching for proper sign-offs and ambiguous gaps between entries.
Airworthiness Directive (AD) compliance records: Every applicable federal or civil aviation authority airworthiness directive must have a supporting logbook entry. Each one-time, recurring, or impending AD's logbook documentation must include the compliance method and date plus an authorized individual's signature.
Service Bulletin (SB) updates: The inspector reviews all mandatory or recommended manufacturer SBs. Safety, structural, or engine-related SBs are especially important. Ideally, all applicable SBs have been incorporated, and they carry a logbook entry.
Computerized maintenance program (CMP) tracking data: CMPs report current airframe hours, component times, and scheduled inspection updates. An inspector's red flag is a "Completed" tracking program item without corresponding logbook documentation.
Status of life-limited parts (LLPs) and components: Life-limited parts must have accompanying status sheets. Examples include engine rotating parts, hot section modules, and landing gear components. The inspector searches for parts for which time was "carried forward" from a previous record despite no source document. This lack of documentation could result in a part replacement at the buyer's expense.
Major repairs and alterations documentation: The inspector searches for major repair or Supplemental Type Certificate (STC) documentation relative to the airframe, interior, or avionics. If the modification does not match the original type data sheet, a valid FAA Form 337 and a logbook sign-off must be completed.
Damage history and repair documentation: Past cosmetic or structural damage must be documented with historical accounts, engineering orders, and repair protocols. The inspector seeks to verify whether repairs were completed to manufacturer-approved structural repair manual or regulatory standards.
What the logbooks reveal
The business jet's logbooks should provide a well-rounded picture of the aircraft's maintenance history. Routine maintenance, scheduled and event-driven inspections, and regulatory and compliance issues are typically documented in its pages.
What a clean logbook looks like
The clean logbook shows a regularly used aircraft that benefits from routine maintenance performed at feasible intervals. This logbook contains easy-to-read entries or clear digital scans. Unexplained gaps are minimal to non-existent, and time-related tracking mechanisms are in consistent use. Squawks are resolved instead of being repeatedly postponed.
All scheduled inspections under the aircraft's inspection program are accompanied by authorized sign-offs plus related work orders and/or invoices. The logbook also features consistent documentation of required tests and inspections.
The clean logbooks also contain supporting maintenance documentation, especially the FAA Form 337 and major repair or alterations approvals. When appropriate, flight manual supplements and/or Supplemental Type Certificate (STC) documentation exists. All equipment list updates, along with weight and balance updates, are accompanied by the proper backup information.
Where a patchy logbook gives the buyer leverage
The questionable logbook may interest a buyer looking for negotiation angles. Every gap the inspector can't close is a discount the seller has to defend.
Unclear documentation typically lacks legibly written entries and logical timelines. For instance, an ambiguous handwritten sign-off phrase lacks accompanying work orders, technical data references, and/or part serial numbers.
On a related note, a "reconstructed logbook" may replace an original "lost logbook." The newly inserted logbook may contain notarized affidavits and third-party vendor invoices instead of original entries made when the work was performed.
Ideally, a business jet is enrolled in the same digital maintenance tracking program throughout the aircraft's life. Suboptimal logbook entries could show the jet moving between multiple software packages. Alternatively, maintenance events could be detailed on standalone spreadsheets.
Owners are required to document compliance with all FAA ADs. However, a patchy logbook may contain insufficient AD and compliance date information. Alternatively, the logbook displays the original AD signoff but lacks any subsequent signoff documentation.
Logbooks should provide all necessary documentation on a major aircraft structural repair or interior modification. Inadequately prepared entries may lack engineering approval details, a Supplemental Type Certificate, or an FAA Form 337.
A major component swap-out, such as one involving the aircraft's engine, APU, or landing gear, must be accompanied by all required documentation. A patchy logbook entry lacks these key details.
Where corrosion hides
Airframe and internal corrosion (and related damage) is a major pre-buy inspection focus. Depending on the corrosion's scope and damage extent, the problem could complicate or potentially derail the purchase transaction.
Lavatory-related fluid leaks, often into adjacent floorboards, are common corrosion sources. Aircraft that spend significant time in environments infused with water and salt (e.g., aircraft based in humid or marine environments) are at substantial corrosion risk. Inadequate aircraft surface seals can trigger corrosion in primary structural components.
Why engines and APU get their own inspector
A business jet's engines and APU are among the highest-dollar components of an aircraft purchase transaction. To inspect this equipment, the buyer should engage a standalone manufacturer-authorized MRO or specialized maintenance operation instead of the seller's inspection facility. Maintaining impartiality is key. Key items include:
Logbooks and records analyses: The inspector should ensure logbooks' continuity from birth until the present. Tracking criteria include the life-limited parts, total time/cycles since new, and time/cycles since overhaul. Event entries matter too. Engine and APU manuals can require a borescope after events such as a hot start or bird ingestion, so an event like that in the logbook with no borescope entry behind it is a finding.
Airworthiness Directives and Service Bulletins compliance: The inspector seeks total compliance with all mandatory FAA/EASA and manufacturer directives. Upcoming calendar dates and cycle-due compliance dates are most significant.
Engine maintenance program enrollment: The inspector will determine if the engines and/or APU are currently enrolled in an hourly cost maintenance program. The inspector also wants to know if (and how) the program coverage transfers to a new owner along with the transition cost.
Hot section and compressor borescope inspections: The inspector conducts thorough borescope inspections of the engine's hot section and compressor. Applicable components include the engine's turbine blades, combustion liners, fan areas, and compressor. Applicable components include the engine's turbine blades, combustion liners, fan areas, and compressor, looking for signs of heat distress, cracking, erosion, sulfidation, or foreign object damage.Not every engine specialist agrees that a pre-buy borescope should be ordered by default. In an AirMail Focus column on GlobalAir.com, Delray Dobbins of Engine Assurance Program argued that, without a specific airworthiness reason, a full borescope can push a healthy engine into shop work the engine program won't cover, and that ground runs and years of trend data say more about engine health. Buyers should settle the question with their technical representative before the inspection starts, based on the engine's history.
Two other checks round out the engine evaluation:
Fluid and oil evaluation: The inspector obtains oil samples for spectrographic evaluation. Metal particles in the oil could indicate signs of abnormal wear. Additionally, the inspector looks for debris in gearboxes, magnetic chip detectors, and filters.
Performance ground runs: By ordering engine and APU ground runs, the inspector may observe fuel, oil, or pneumatic leakage. They also evaluate start times, operational parameters, ITT/EGT margins, and bleed air output.Because serious engine or APU problems will likely be a red flag, the buyer should consider ordering the records review and engine evaluation first, before committing to the full airframe inspection.
How much a pre-buy inspection costs
Aircraft technical support firm Air Tech Consulting puts typical pre-purchase inspection costs for business aircraft in the ranges below. Specific pricing depends on the aircraft and inspection scope.
Business aircraft pre-buy inspection cost ranges
Business aircraft type
Pre-buy inspection cost range
Turboprops and small cabin aircraft
Several thousand to low five figures
Light business jets
$15,000 to $30,000 (scope-determined)
Midsize and super-midsize jets
$25,000 to $50,000
Large cabin and heavy jets
$40,000 to $75,000 and up
Commercial transport aircraft
Extremely variable. Records depth, airworthiness status, upcoming major checks, and bridging requirements are factors.
Source: Air Tech Consulting (2026)
The inspection cost may not be the biggest pre-buy expense. One significant engine issue, corrosion finding, or landing gear event can move the deal's economics by six or seven figures, Air Tech Consulting notes. An undocumented modification or missing major repair can also be expensive to resolve.
How pre-buy findings reshape the deal
A thorough pre-buy inspection provides the buyer with a comprehensive view of an aircraft's records, systems, and equipment. Equipped with this detailed information, and often with the aircraft broker's guidance, the buyer re-evaluates the purchase agreement.
The buyer decides what (if any) inspection issues have given them an improved bargaining position. Inspection hiccups could change the negotiation dynamics in multiple ways.
The most direct lever is price. A jet that comes out of the hangar with a gap in its records or a hot section inspection coming due is worth less than the one the buyer agreed to, and the offer should reflect it. The findings that move the number are the ones that change the aircraft's safety, its schedule, or what it will cost to own. Cosmetic squawks rarely qualify.
The buyer should always share the discrepancies report with the seller. More often, the discrepancy list turns into a work order with two columns: what the seller fixes before closing, and what the buyer agrees to live with. That split is far easier to settle when the purchase agreement already defines an acceptable discrepancy.
The seller is the only party who can approve repair-related charges. If the buyer fails to get the seller's approval, and directs the repair facility to complete the work anyway, the seller's refusal to pay could land the transaction in legal jeopardy.
Lenders and underwriters read the same report. A damage history the buyer can live with may still give a lender pause on terms or push an insurer to price the policy higher, and either can change whether the deal pencils out.
Time is the cost buyers tend to underestimate. A missing record can take weeks to chase down with a former shop, a back-ordered part can hold the aircraft in the hangar, and an engine finding can add inspections nobody scheduled. Closing dates slip accordingly.
In certain cases, a buyer may decide that inspection-related issues have substantially lowered their confidence in the aircraft's viability. Based on that, and with their broker's guidance, the buyer may decide to walk away.
What buyers should watch
The inspection fee is the smallest number in this process. What the inspection finds, and who pays for it, depends on three choices the buyer makes before the jet reaches the hangar: which shop does the work, how the purchase agreement defines an acceptable discrepancy, and whether engine money goes to a borescope or to trend data and ground runs.
For the CEO at Van Nuys, the paint was the easy part. What she was buying sat in a stack of logbooks she had not yet opened.
Browse current business jet listings on GlobalAir.com.
Pre-buy inspection FAQ
What is an aircraft pre-buy inspection?
A pre-buy, or pre-purchase, inspection is an independent technical evaluation of a used aircraft before the sale closes. The inspection shop reviews the logbooks and maintenance records, checks the airframe for corrosion and damage, and evaluates the engines and APU. The findings often decide whether the deal closes, gets repriced, or falls through.
How much does a pre-buy inspection cost on a business jet?
Air Tech Consulting puts typical costs at $15,000 to $30,000 for light jets, $25,000 to $50,000 for midsize and super-midsize jets, and $40,000 to $75,000 or more for large cabin and heavy jets. Scope drives the final price, and a single finding can cost far more than the inspection itself.
Which records matter most in a pre-buy inspection?
Title and registration, weight and balance documentation, continuous airframe, engine, and APU logbooks, AD and service bulletin compliance, maintenance tracking data, life-limited parts status, major repair and alteration paperwork such as FAA Form 337, and damage history.
Should the engines be borescoped during a pre-buy?
Opinions differ. Many buyers order hot section and compressor borescopes. Some engine specialists argue that, without a specific airworthiness reason, ground runs and engine trend data say more about engine health, and that a borescope can push a healthy engine into shop work the engine program won't cover.
Who pays for repairs found during a pre-buy inspection?
It is negotiated. The buyer shares the discrepancy list with the seller, and only the seller can approve repair charges on the aircraft. The purchase agreement should define acceptable discrepancies, which items the seller must fix, and how costs are shared.
Can a buyer walk away after a pre-buy inspection?
Yes, if the purchase agreement allows it. Typical agreements let the buyer ask for repairs, negotiate a price adjustment, or reject the aircraft based on the findings.