Attention all pilots,
There is going to be extensive construction at the Boise Airport for the next six months. During this time Taxiway Delta will be relocated. There will be numerous phases during the construction. There will be future SPANS notices with attachments to update open closed runways and movement areas. During this first phase of construction Runway 10L/28R will be closed. There will be a portion of the closed runway that will be used for taxiing aircraft as depicted in the attachment between taxiway D and taxiway M. With only one runway available, opportunities for pattern work will be severely reduced, especially during daylight hours. Taxi routes will change during each phase as construction progresses. Dates in the construction plan are weather dependent and may change.
• Exercise extreme caution with unfamiliar taxi routes especially when the route enters a
runway. Never enter a runway without a specific clearance to enter that runway. When
in doubt ask ATC for progressive taxi.
• Ensure you are departing on the surface which you have been cleared for, if in doubt
verify with ATC before starting take-off roll.
• Aircraft will be taxing and holding on RWY10L/28R, be extremely vigilant to align
with the correct runway, verify any uncertainties with ATC.
See attached diagram for details.
https://www.faasafety.gov/files/notices/2024/Apr/Phase_D1.pdf