(RENO NEVADA, JULY 28TH 2022)
Technisonic Industries Ltd., an industry leader in the development, manufacture and support of special-mission airborne communications systems, announced its new All-Band analog module designed for the TDFM-9200 and 9300 series radios called the “T6” at a special customer social in Reno, Nevada at APSA’s annual APSCON convention.
Recognizing that the communication requirements of mission based aircraft continue to grow in both scope and capability, Technisonic recently undertook the challenge posed by its federal, military and law enforcement operators to expand the band capability of it’s TDFM-9000 series radios. The result of this challenge is the all-new T6 module. The T6 module fully supports the additional critical bandwidth’s that were previously only available separately. These include “Low Band” inclusive of 30-50 MHz, VOR Voice 108-117.9MHz AM allowing for legacy communications across provisioned VOR navigation facilities, VHF-AM “Airband” 118-156MHz, as well as UHF-AM 225-400MHz.
“The new T6 module represent a considerable jump in the communications spectrums now available in the TDFM -9200 and -9300 products, by offering all analogs bands in one module, operators now will no longer need to balance FM vs. analog needs,” said Technisonic Director of Business Development Jim Huddock. “This addition makes the TDFM-9000 series easily the most scalable and capable on the market.
The new T6 allows for both programming of channels via newly developed TDP software, or the operator can choose to program channels such a tower frequency, with the radio automatically defining the channel as simplex via the FREQ option, support of more complex programming such as Duplex channels, setting PL Tones, and channel names the operator can choose the FPP option. The ability to scan and assign appropriate bandwidth spacing, 12.5Khz, 25KHz, 8.33KHz is fully supported by the T6.
“Technisonic is very excited about the direction the TDFM line has taken the last few years. With the full integration of it’s MCP technology, which allows for the quick on-boarding of external radio sources such as portables, and satellite, to its advancement in firmware, allowing greater flexibility that allows operators to enable or disable features as needed or desired, to today’s announcement of the T6 Module. The TDFM-9000 series is now scalable up to as many as eight integrated radios in one package, all backed by the full support of the team at Technisonic,” said Huddock.
Technisonics invites you to visit them at booth 307 during APSCON in Reno, NV APSCON, July 28th – 29th to see the full capability of the Technisonic TDFM-9000 product line on display, or contact Jim Huddock at [email protected]
About Technisonic Industries Ltd.
Technisonic Industries Ltd. is a leader in the development of aeronautical FM, and multi-band special-mission airborne radios and audio communications systems. Its specialties include P25 airborne radios, digital and analog airborne audio, AM base stations for airlines and analog airborne FM radios. The privately held Canadian electronics manufacturer has its principal offices in Mississauga, Ontario, near Toronto International Airport.