FAA proposes Canada's PW800 engine limits. The $85 estimate covers one step.
The FAA has proposed an airworthiness directive for all Pratt andamp; Whitney Canada PW814GA and PW815GA engines, the powerplants Pandamp;WC certified for the Gulfstream G500 and G600, and it puts the cost at $85 an engine. The proposal, FAA-2026-13811 issued Nov. 9 and published Nov. 13, would make Transport Canada's AD CF-2025-71 a U.S. requirement. It counts 333 engines on U.S.-registered airplanes.If you own, fly, or maintain a G500 or G600, this is the engine paperwork that changes. The proposal would require compliance with the Canadian directive in its entirety, with one exception. Wherever the Canadian AD refers to its own effective date, the U.S. AD would use its own. Canada's directive, effective Jan. 13, 2026, states that no part may be installed or remain installed unless it meets the limits, tasks, intervals, and repair limits in Pandamp;WC's airworthiness limitations manual, Issue 021, dated Oct. 8, 2025. That manual is where an engine maker lists the mandatory replacement intervals and inspection intervals for specific parts.Transport Canada says Pandamp;WC's newer structural analyses "identified a need for updated life limits, inspections and repair limits on certain parts." The FAA calls the changes new or more restrictive limitations and intervals for life-limited parts and says the AD is meant to prevent failure of those parts, which could damage the engine and the airplane. The Canadian directive supersedes CF-2023-73 from November 2023.The FAA's $85 estimate covers one work-hour per engine to revise the airworthiness limitations section. It is the only action listed in the cost table, which includes no parts costs. The table has no line for the replacements, inspections, or repairs the Canadian directive requires once a part reaches its limit. Neither document names those parts or lists the limits, which sit in Pandamp;WC's manual, so the AD itself can't say how many parts are involved, when they fall due, or who pays.Why it mattersNone of this is new to Canadian operators, who have worked under these limits since January. What changes for U.S. operators is a compliance clock and an $85 line that covers the paperwork, not the parts. For the real number, ask your engine program provider or maintenance shop which issue of Pandamp;WC's manual your engine's records follow. That's what determines what you owe beyond the filing fee. The FAA is accepting comments on the proposal through Dec. 28.Browse current Gulfstream G500 and G600 listings on GlobalAir.com.