|
COUNTRY:
|
REGION:
|
CATEGORY:
|
|
|
|
Listed: 9/1/2010 Base Mechanic
|
|
|
 |
Air Evac Life
306 Davis Drive
West Plains, Missouri 65775
United States
Job Location: Texas
|
recruiter@air-evac.com
www.lifeteam.net
|
This position is responsible for performing inspections and work as required for maintaining the base aircraft.
DUTIES:
- Maintenance of Aircraft and Equipment
- Planning Maintenance from C.A.L.M. Reports
- Maintain and Inventory Base Spare Parts
- Assist the RMO to Maintain the RMO Aircraft as Required
- Perform daily inspections and Preventive Maintenance
- Monitor Manuals for Currency for the Company
- Read, understand, and interpret maintenance manuals
- Other Duties and Special Projects as Assigned
- On call during workweek
- Required to work after hours and weekends as needed
To be considered for this position you must meet the following criteria listed below.
QUALIFICATIONS:
- High School or Training Equivalent
- Current A & P Certificate
- Current State Drivers license
- Strong Communication Skills
- Written
- Verbal
- English as Primary Language
- Able to Lift a Minimum of 50 pounds
- Able to Use Arms, Hands, and Legs to Accomplish Tasks
- Able to Sit, Stand, and Squat for Extended Periods
- Able to Climb with Balance on and Off Aircraft
- Computer Knowledge Microsoft Office Suite, Outlook
Air Evac offers:
401(k) Match
Health Insurance
Dental Insurance
Employer Paid Short Term Disability
Employer Paid Long Term Disability
Employer Paid Life Insurance*
Vision Plan
EAP Program
Large operational area with many opportunities for transfer
|
|
Listed: 9/1/2010 Regional Maintenance Manager South Texas
|
|
|
 |
Air Evac Lifeteam
306 Davis Dr
West Plains , Missouri 65775
United States
Job Location: Texas
|
recruiter@air-evac.com
www.lifeteam.net
|
The Regional Maintenance Manager is responsible for over seeing operations of all maintenance services in their region while adhearing to company policies and procedures, airworthiness directives, service bullentins, service letters and applicable Federal Aviation Regulations.
To be considered for this position you must meet the following criteria listed below.
Qualifications:
-
A&P Licenses
-
Ten years minimum helicopter experience
-
Three years experience maintaining Bell 206 and 407 helicopters
-
Knowledge of FAR's
-
Prior Part 135 and 145 repair station experience preferred
-
Prior helicopter EMS preferred
-
Inspection Authorization is highly desirable
Duties:
- Ensure bases have appropriate staffing levels.
- Manage the professional development of mechanics from initial and recurring training to developing skills for roles in leadership positions.T
- Travel to regional bases as necessary. Other location travel may be required.
- Perform designated QA and audit functions.
- Identify problems, collect data, establish facts and draw valid conclusions.
- Provide 24 hour technical support to base technicians in assigned area.
- Assist in new start up bases and assist new mechanic with job duties
- Be able to act as a relief mechanic for technicians' time off and vacation as needed relative to staffing requirements.
- Ensure technicians have proper tooling and facilities to perform their duties.
- Performs other duties as assigned.
Air Evac Offers:
- 401(k) Match
- Health Insurance
- Dental Insurance
- Employer Paid Short Term Disability
- Employer Paid Long Term Disability
- Employer Paid Life Insurance*
- Vision Plan
- EAP Program
|
|
Listed: 8/26/2010 A&P Mechanic
|
|
|
 |
A & P Helicopters, Inc
PO BOX 245
Richvale, California 95974
United States
Job Location: California
|
Contact: Craig Compton
craig@APHelicopters.com
Ph: 530-742-4119
Fx: 530-882-4543
APHelicopters.com
|
Opening for a full-time licensed A&P Mechanic. Current aircraft: Bell 206, Hughes 500D, UH-1H. Must be motivated; have good work ethics; safe positive attitude and willing to work with the Director of Maintenance. You must pass a FAA/DOT mandated drug screening test. Competitive pay and benefits package will be offered. Little to no travel. Willing to negotiate relocation expenses. |
|
Listed: 8/26/2010 A&P Mechanic
|
|
|
 |
Central Helicopter Service, Inc
8913 Paul B Koonce
Houston, Texas 77061
United States
Job Location: Texas
|
Contact: Curtis Scope
curtiss@chs1.com
Ph: 713 644 5900
Fx: 713 644 5996
chs1.com
|
Central Helicopter Service, Inc. is seeking an experienced A&P Mechanic must have a minimum of 5 yrs experience with a Bell 206L and Bell 407. Bell 222B experience a plus. Full or part time position available at Hobby Airport in Houston, Tx.
|
|
Listed: 8/24/2010 Airframe & Powerplant Mechanic
|
|
|
 |
San Joaquin Helicopters
1408 Lexington St.
Delano, California 93215
United States
Job Location: California
|
Contact: Steve Randalls
srandalls@sjhelicopters.com
Ph: 661-725-1898
Fx: 661-721-1014
www.sjhelicopters.com
|
| San Joaquin Helicopters is looking for experienced A&P mechanics. 3 yrs. Bell light and medium helicopter experience preferred. USFS card a plus. Position is full time with benefits located in Delano, CA. For consideration please fax or email resume. |
|
Listed: 8/17/2010 Helicopter Mechanic
|
|
|
 |
HeliStream, Inc.
3000 Airway Ave. Ste. 350
Costa Mesa, California 92626
United States
Job Location: California
|
Contact: Ken Stuart
kstuart@helistream.com
Ph: 714-662-3163
Fx: 714-662-1687
www.helistream.com
|
Helistream, Inc. is seeking a LICENSED A & P MECHANIC for maintenance of our helicopters at our main operations in Costa Mesa, CA. Applicant must have experience and/or training on at least one of the following helicopters: AS 350, EC 120, MD 500, or BELL 205. Applicant must have a minimum of 3 years as a helicopter mechanic. Must be available to work late evening shifts and weekends. Must be available for interview in Costa Mesa, CA. This is a full-time position with benefits. Please submit resume to: kstuart@helistream.com
|
|
Listed: 8/17/2010 Full-Time Helicopter News Pilot- OK City
|
|
|
 |
Helicopters, Inc.
United States
Job Location: Oklahoma
|
Contact: Assistant Chief Pilot
pilotrecords@heliinc.com
|
Helicopters Incorporated is the leader in Helicopter Electronic News Gathering, in business for over 30 years.
We have an opening for a F/T pilot in Oklahoma City, OK. This pilot will be responsible for managing customer relations and providing quality aerial news gathering flight. M-F 10am-7pm, evenings and some weekends on call.
Requirements:
FAA Commercial Helicopter
2000 Hours Total
1500 Hours Helicopter
250 Hours Turbine
100 Hours in Bell 206B3
If interested and qualified, please submit your resume with flight hour detail in Word format to pilotrecords@heliinc.com. IDENTIFY OKLAHOMA CITY IN SUBJECT LINE.
|
|
Listed: 8/14/2010 A&P Mechanic
|
|
|
 |
TEMSCO Helicopters Inc
1650 Maplesden Way
Juneau, Alaska 99801
United States
Job Location: Alaska
|
Contact: Ron Gile
ron_gile@temscoair.com
Fx: 907-789-2337
temscoair.com
|
Looking for an A&P mechanic with at least 3 years helicopter experience. Models preferred are the AS350 and MD 500. Forest service card a plus. Must have your own tools and a current A and P license. Position is in Juneau. Relocation assistance may be available. This job is a full time position with a thirty day probation period. Please send resume's to Ron_gile@temscoair.com |
|
Listed: 8/12/2010 AIRCRAFT TECHINCIAN/MECHANIC
|
|
|
 |
CALSTAR
4933 Bailey Loop
McClellan, California 95652
United States
Job Location: California
|
JJensen@calstar.org
Fx: 916-921-4067
|
California Shock Trauma Air Rescue (CALSTAR) is a nonprofit regional air ambulance service. Our mission is to save lives, reduce disability and speed recovery for victims of trauma and illness. CALSTAR has an immediate opening for a full time:
AIRCRAFT TECHINCIAN/MECHANIC
The Aircraft Technician/Mechanic reports to the Senior Mechanic.
ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following. Other duties may be assigned.
·
· Maintains, repairs, and troubleshoots aircraft airframe and engine to ensure aircraft conformance with FAA regulations.
· Troubleshoots and determines malfunctioning parts.
· Recommends part changes or adjustments to aircraft specifications to improve aircraft and or engine performance.
· Documents and maintains paperwork for maintenance according to CALSTAR and FAA regulations and procedures.
· Perform scheduled and nonscheduled inspections on company aircraft.
· Ensures that all maintenance that he/she performs is done in accordance with the CALSTAR Operations Manual and applicable A.A.I.P. or manufacturers manuals and current Federal Aviation Regulations.
· Responsible for identification of aircraft discrepancies and the determination if the discrepancy is or is not within acceptable limits as determined by the manufacturer or other data that is acceptable to the FAA.
· Once a discrepancy has been identified, arrange for parts and notify the Senior Technician or Lead Technician of expected part arrival time and aircraft back in service time.
· Responsible for ensuring that any discrepancy that must be deferred as per the CALSTAR MEL is done so and is monitored as per the guidelines set forth in CALSTAR’s Operations Manual and Minimum Equipment List.
· Performs other duties and functions as directed by the Director of Maintenance or Service Manager.
Qualifications and Experience:
This position requires a high school degree, an A&P mechanics certificate, and 2-5 years experience in the field or in a related area. He/she must be familiar with standard concepts, practices and procedures within a particular field. Relies on limited experience and judgment to plan and accomplish goals. He/she will perform a variety of tasks while under general supervision. A certain degree of creativity and latitude is required. Reports to the Senior Technician and is responsible to the Lead Technician.
Selected candidate must be able to pass a drug screening process.
Work Environment:
May be required to travel to and between remote location(s) in austere environments. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
Physical Demands:
1. Must be able to walk or stand on level and/or inclined surfaces up to three (3) hours per day and sit for up to five (5) hours per day. 2. Must be able to routinely climb / descend stairs. 3. On occasion must be able to lift 30 pounds. 4. Must be able to routinely grasp or handle objects, use finger dexterity, bend elbows / knees, and reach above / below shoulders. 5. Must be able to read and interpret newspaper and typewritten print. 6. Must be able to communicate by voice and detect sound by ear. 7. Must be able to distinguish color and judge three-dimensional depths.
· Successful candidate must be able to pass a drug test.
· Excellent benefits package, Medical, Dental and Vision, Profit Sharing Plan, and Life Insurance. Please send your resume to:
JJensen@ CALSTAR.org or fax to:
(916) 921-4067
CALSTAR is an equal opportunity employer
|
|
Listed: 8/11/2010 PILOTS and MECHANICS
|
|
|
 |
United States
Job Location: Nevada
|
info@justhelicopters.com
|
2 Day Career Development Seminar & Networking Event Sponsored by Bristow Group and the Rotorcraft Pro Media Network
October 31 & November 1, 2010 in Las Vegas, NV
To read a MAGAZINE ARTICLE on the Seminar as published in the October 2008 issue of Rotorcraft Professional Magazine - CLICK HERE.
To read TESTIMONIALS of what people had to say about the event - CLICK HERE.
Who might benefit from this seminar?
Career Helicopter Pilots and Mechanics.
Put a face to a name! Meet the hiring authorities face to face! Get
your resume into the right hands! This Seminar is designed to offer
helicopter industry professionals, who may be new to the industry, or in
a transition phase of their career, an opportunity for learning and
networking. Those who are looking for inside information that may give
them that competitive edge in the helicopter industry hiring process.
Knowledge is Power! Who might this seminar benefit?
- Students presently in a Pro Pilot Training Program.
- Flight Instructors getting ready to break out of the training environment and into the REAL WORLD!
- Individuals considering transferring to other sectors of the industry. i.e., GOM to EMS.
- Individuals transitioning from Military to Civilian.
NEW FEATURE - Bring Your Spouse!
BY POPULAR DEMAND
- Bring your spouse with you to this entire educational event for $70.
Lunch will be included for your spouse as well on day 1 of the event.
Your career decisions impact the entire family so why not include your
other half in the process? Not to mention the fun to be had in Las
Vegas!
Seminar Topics and Event Schedule:
Day One:
09:00 - 09:10 Intro / Administrative
09:10 - 10:00 Advancement in the Helicopter Industry
10:10 - 10:50 Corporate Flying - Is it who you know?
11:00 - 11:50 Careers in Law Enforcement Flying
11:50 - 12:30 Networking - Do or Die!
12:30 - 13:30 Lunch Provided
13:30 - 14:20 Resume Tips and Tricks for Helicopter Pro's
14:30 - 15:20 Professionalism & Attitude "Recipe for Success"
15:30 - 16:20 Fire/Utility Flying
16:30 - 17:15 Success Flying Tours-What to Expect?
17:15 - 17:30 Review / Open Q&A
Day Two:
08:30 - 08:40 Intro/Administrative
08:40 - 09:20 Careers in Advanced Helicopter Training
09:30 - 10:20 Military to Civilian - Making the Jump!
10:30 - 11:15 So You Want to be and EMS Pilot?
11:15 - 11:30 Scholarship Awards
11:30 - 13:00 Lunch Break
13:00 - 13:50 Success in the Oil Patch - What to Expect?
14:00 - 14:50 Career Survival 101 - Nuggets to Live By!
15:00 - 15:30 Closing / Review / Open Q&A
15:30 - 18:00 Employer - Attendee Networking Event. Meet Employers one on one!
**schedule subject to change
Speakers:
- Lyn Burks - Veteran Helicopter
Pilot, ATP/CFII, Helicopter Industry Recruiter, Owner/Developer of
Justhelicopters.com, Verticalreference.com, Justhelicopters.TV,
Helicoptersalaries.com
- Randy Rowles, MBA – Pilot Examiner, ATP, Gold Seal CFII, Master CFI, VP
Business Development / Night Flight Concepts - Jim Palmer – Thirty
plus years experience in the helicopter aviation industry in the Gulf
of Mexico; Human Resources Representative and Pilot Recruiter; currently
employed as Asst. Manager of Human Resources with the Bristow Group’s Gulf of Mexico Business Unit, one of the largest helicopter operators in the world. Mr. Palmer also worked for Petroleum Helicopters (PHI).
- Dean Springer – Retired Senior Special Agent with Department of Homeland Security-ICE. Former Director of Training. and National Aviation Safety Officer for Operation with the U.S. Customs Service Aviation Operations.
NTSB trained & certified aircraft accident investigator. Dean has
over 30 years of law enforcement and aviation experience for local and
federal agencies.
- Chris Bassett - Veteran Helicopter Pilot & Chief Pilot of Air Methods Corporation. Air Methods is the World's largest Air Ambulance Operator.
- Michael Gullotti, Chief Pilot of Papillon Grand Canyon Helicopters, NV Division. Papillon Helicopters is the World's largest Helicopter Tour Operator.
- Barry Lloyd–
Forty-four year veteran helicopter pilot with experience in both
civilian and military operations. USFS/CDF fire carded pilot for over 33
years. Certified Accident Investigator. Presently an FAA Designated
Pilot Examiner as well as Training Pilot and Part 135 Check Airman for
several helicopter operators.
- Heidi Ames - Pilot Hiring Manager for Med-Trans Corporation,
a Nationwide Part 135 EMS Operator. Master Army Aviator with 18 years
civilian and military experience. Regional Aviation Manager, Check
Airman and Day, Night, NVG Instructor Pilot.
- Janie Foster - Bell 412 Captain for Evergreen Helicopters.
Lead Pilot and Base Safety Manager on a medevac/SAR contract in
Alaska. Also experienced in the areas of wildland firefighting,
logging, utility, and offshore operations.
- Larry Karpman - Human Resources/Recruitment, Flight Safety International. Since founded in 1951 Flight Safety Intl. has grown to become the worlds largest civilian aviation training company.
- ONSITE RESUME CONSULTANT -
Chris Fischer; a helicopter pilot, author, and technical writer will be
available during the entire event providing one on one resume consults
with attendees. There is no charge for this service!
|
|
Listed: 7/29/2010 A&P Mechanic
|
|
|
 |
Hillcrest Aircraft Company
540 O'Connor Road
Lewiston, Idaho 83501
United States
Job Location: Idaho
|
Contact: Kelly B. Bean
kbb@hillcrestaircraft.com
Ph: 208-746-8271
Fx: 208-743-6872
hillcrestaircraft.com
|
Bell Helicopter Customer Service Center and Part 135 Helicopter Operator is hiring the following full time position: Experienced A&P shop and field mechanic for BHT 205A1, 407, and 206 series helicopters, Avionics experience a plus. Benefits and relocation package. Long term opportunity with a well established company of 54 years. Contact Kelly Bean; kbb@hillcrestaircraft.com. |
|
Listed: 7/28/2010 Quality Assurance Inspector
|
|
|
 |
CALSTAR
United States
Job Location: California
|
JJensen@calstar.org
|
California Shock Trauma Air Rescue (CALSTAR) is a growing nonprofit regional air ambulance service that operates under both Part 135 and 145 certificates. Our mission is to save lives, reduce disability and speed recovery for victims of trauma and illness.
CALSTAR has an immediate opening for a full time:
Quality Assurance Inspector
The Quality Assurance Inspector is responsible to the Chief Inspector and the Director of Quality Assurance. The Quality Assurance Inspector is responsible for inspecting work performed in our Part 145 repair station, Reviewing aircraft records for work performed in the field by our technicians under our Part 135 certificate and provide technical support to technicians both in person at our McClellan facility and via telephone to technicians away from our McClellan facility.
The QA Inspector will be based at our McClellan, CA facility. Pay is commensurate with experience. CALSTAR offers one of the best benefits packages in the industry.
· FAA Airframe and Powerplant Mechanic
· Experience in helicopter maintenance and/or repair operations including Part 145 Operations or Part 135 Operations.
· Experience and knowledge associated with the operation and maintenance of various major OEM light turbine helicopters such as, Eurocopter, Agusta, Bell, and MD.
· Knowledge of, and experience with, computer systems including Microsoft Word and Excel is required. Individual must possess above average technical competence and excellent communication skills.
ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following.
· Ensure that maintenance, preventative maintenance, and alterations have proper historical records generated in accordance with applicable FARs and CALSTAR procedures.
· Maintain and produce aircraft specific reports outlining current time, and time remaining for life limited components, airworthiness directives and required inspections.
· Ensure that all inspections are properly performed and all completed work has the proper inspection records, reports, and forms used by the Repair Station properly executed prior to releasing the product for return to service.
· Some travel may be required.
· Other duties may be assigned by the Quality Assurance Manager and the Chief Inspector.
Selected candidate must be able to pass a drug test.
Excellent benefits package, Medical, Dental and Vision, Profit Sharing Plan, and Life Insurance.
Please send your resume to:
JJensen@calstar.org or
fax to: (916) 921-4067
|
|
Listed: 7/28/2010 Lama Mechanic
|
|
|
 |
Skydance Helicopters
101 Wass Way
Minden, Nevada 89423
United States
Job Location: Nevada
|
Contact: Troy Creeks
maintenance@skydanceheli.com
Ph: 775-782-4040
Fx: 775-782-0140
|
| Lama Mechanic needed - must have experience with SA315B - Lama helicopter. Field work. 15 on - 15 off. Contact Troy Creeks - 775-783-3447 email resume to maintenance@skydanceheli.com |
|
Listed: 7/21/2010 Helicopter Mechanic
|
|
|
 |
Paradise Helicopters
PO Box 5371
Kailua Kona, Hawaii 96745
United States
Job Location: Hawaii
|
Contact: Chance Wolf
careers@paradisecopters.com
Ph: 808-329-6601
Fx: 808-329-6602
www.paradisecopters.com
|
|
Paradise Helicopters has been serving Hawaiian visitors for over 10 years and is seeking a Helicopter Technician at the Kona Airport.
Job Duties:
- Performs all maintenance in accordance with applicable regulatory, manufacturer‘s and Paradise Helicopters regulations, policies and procedures.
- Maintain aircraft to the highest standards possible.
- Maintain aircraft in excellent aesthetic condition.
- Maintain ground support equipment, and work areas in a clean and organized manner.
Required Qualifications:
- FAA A&P Certificate.
- Knowledge of Current FAR’s.
- Must have tools appropriate for the mission.
Preferred Qualifications:
- 500 experience.
- 407 experience.
- IA authorization a plus
This is a full-time, salaried position with full benefits including health.
To apply, please submit your resume via email to careers@paradisecopters.com
|
|
Listed: 7/21/2010 Supervisor, Component Shop
|
|
|
 |
Heli-One
4300 80th St.
Delta, British Columbia V4K 3N3
Canada
Job Location: British Columbia
|
Contact: Holly Gold
holly.gold@chc.ca
|
Give Your Career a Vertical Lift At any given moment, on any given day, a CHC aircraft is in the air somewhere in the world. Whether we're transporting the men and women who keep the world's offshore oil and gas flowing, or taking an injured patient to safety, CHC sets the standard for safety, customer service, modern aircraft and efficiency. This is a billion-dollar business built on the foundation of a strong team spirit in our company and our greatest strength is our motivated and passionate employees.
Supervisor, Component Shop This position supervises and supports component shop operations to maximize quality, efficiency and productivity while minimizing waste.
Responsibilities:
Through effective leadership, create a supportive and rewarding team culture within the Heli-One workshops
Lead team by reviewing workload and managing and assigning team resources to ensure compliance with Key Performance Indicators and achievement of customer satisfaction
Ensure quality standards are attained and, where appropriate, corrective action is taken in order to prevent deviations
Ensure compliance of all regulatory and organizationally determined requirements with respect to health, safety and the environment
Prepare necessary reporting and documentation in order to manage personnel requirements
Assist in the instruction of apprentices
Supervisory responsibilities including performance reviews, establishment of goals, pay/reward decisions, hiring/firing and employee discipline
International travel may be required
May perform other duties as assigned
Position Qualifications & Experience:
Two years of formal post-secondary training in either a technical or logistical field or equivalent education, training and experience
A minimum of 3-5 years of relevant experience
Experience in successfully managing in a manufacturing environment
Self motivated and results oriented with a focus on quality
Ability to make excellent decisions and set appropriate priorities
Excellent listening, verbal, and written communication
Excellent collaborative problem solving skills
Ability to work in a rapidly evolving and dynamic environment
Demonstrated team player with excellent interpersonal skills
The Benefits Heli-One's employees are rewarded for their dedication and skill. Some of the benefits available for this position include:
Competitive salary
Comprehensive benefits package Please apply ONLINE at www.heli-one.ca to be considered for this position. CHC is committed to equal opportunity employment and invites applications from all qualified candidates. We thank all candidates for their interest, however, only those selected for an interview will be contacted. Sorry, no phone calls please! |
|
Listed: 7/20/2010 A&P Mechanic
|
|
|
 |
PHI, Inc.
P.O. Box 90808
Lafayette, Louisiana 70509
United States
Job Location: Kentucky
|
resumes@phihelico.com
|
PHI Air Medical
A&P Mechanic
Morehead, Kentucky
QUALIFICATIONS/EXPERIENCE NECESSARY:
· A&P License
· 5 Years Total Helicopter Experience
· 2 Years Field Experience
· EC-135 Experience Preferred
· EMS Experience Preferred
· Interview & acceptance with PHI Air Medical Maintenance Manager.
WORK SCHEDULE/LOCATION:
· 5&2 work schedule
· Successful applicants will be required to live within 1 hour of Morehead, KY.
Send resume to resumes@phihelico.com or
fax to 337-272-4232
Please indicate "Morehead" position in your response.
|
|
Listed: 7/14/2010 Rotorcraft Mechanic
|
|
|
 |
Georgia Department of Administrative Services
United States
Job Location: Georgia
|
recruiter@doas.ga.gov
www.doas.ga.gov
|
|
GENERAL DESCRIPTION:
The Georgia Aviation Authority (part of State Government) has the responsibility for the operation and maintenance of the fixed wing and rotorcraft fleet for the state. We have an immediate opening for a Helicopter Mechanic, Aircraft Inspector supporting the Georgia Public Safety Department fleet.
HIRING SALARY RANGE
Pay Grade 14 - $32,418 - $44,571 per year. Salary offer will be commensurate with qualifications and experience
JOB RESPONSIBILITIES:
- Replaces time or service-limited parts and/or aircraft appliances as needed or on schedule.
- Performs preventative and corrective maintenance on aircraft and associated aircraft appliances in accordance with established schedules and as directed
- Researches and investigates possible solutions to engine, airframe, and associated appliance malfunctions.
- Troubleshoots inoperative or malfunctioning aircraft systems.
- Attends recurrent aircraft technical training to maintain professional currency.
- Completes appropriate sections of the Aircraft and Engine Log forms.
MINIMUM ENTRY QUALIFICATIONS:
- Hold an FAA Airframe and Power Plant Mechanic License
- Minimum or five (5) years of experience as a licensed A&P Mechanic
- Minimum of three (3) years of experience as a Turbine Powered Rotorcraft Mechanic
- Violation free certificate
PREFERRED QUALIFICATIONS: Preference will be given to applicants who, in addition to meeting the minimum qualifications, possess one or more of the following items below. PLEASE CLEARLY INDICATE YOUR KNOWLEDGE OF THESE QUALIFICATIONS ON YOUR RESUME.
- Five (5) or more years of experience as a Turbine Powered Rotorcraft Mechanic
- Bell 206,206L,406 or UH-1H experience
- Inspection Authorization (IA) License
HOW TO APPLY: All applicants must submit
- A completed State of Georgia application, obtained from the DOAS website: www.doas.ga.gov; resume, and salary history from three (3) most recent positions.
- Applications & resumes should be emailed to: recruiter@doas.ga.gov or faxed to 404-463-3699.
- Please reference the job title or announcement number for which you are applying.
- Please include salary requirements on your resume.
Applications/resumes received without a job title, announcement number or salary history will be considered unsolicited applications and will not be reviewed.
DOAS is an equal opportunity employer. |
|
Listed: 7/13/2010 A&P MECHANIC - FT. STOCKTON, TX
|
|
|
 |
MED-TRANS CORP
2871 LAKE VISTA DRIVE #150
LEWISVILLE, Texas 75067
United States
Job Location: Texas
|
Contact: TALENT SCOUT
cooljobs@med-trans.net
Fx: 972-534-1493
www.med-trans.net
|
A&P MECHANIC - FT. STOCKTON, TX
YOU CAN MAKE A DIFFERENCE!
Join a team of highly skilled emergency medical experts, pilots
and mechanics whose mission is to save lives.
Med-Trans provides air medical services through the rapid transport of the critically ill and injured. Med-Trans is renowned for its state-of-the art helicopter equipment has established itself as an industry leader in safe and successful missions. We take great pride in hiring the most competent talented helicopter mechanics available in the industry today!
Med-Trans Corp. offers competitive salaries and an excellent benefits package: medical, dental, & vision coverage; life insurance; a 401(k) retirement plan with a 50% company match; paid time off, holiday pay and time and a half for work-overs.
Med-Trans also provides employees 100% company-paid:
- Life insurance which covers the employees while in flight
- Short-term disability
- Long-term disability insurance
Our A&P Mechanics perform a variety of general helicopter maintenance including, but not limited to, detailed aircraft inspections, minor and major repair alterations and main rotor / tail rotor balancing.
If you are interested in joining the Med-Trans Family as a Mechanic, you will need to possess the following:
- FAA Airframe and Powerplant license
- Minimum 3 years maintenance experience on turbine powered helicopters
- Must have extensive knowledge of FARs
- Bell 407 experience preferred
- Inspection Authorization and additional FAA/FCC ratings is a plus
- IFR helicopter avionics and auto pilot experience is a plus
- Manufacturer training or equivalent on Bell 407, EC135, or both preferred
If your passion is helicopters and you want to work in an environment where every second counts, email your resume to:
cooljobs@med-trans.net or fax to: 972-534-1493.
No phone calls please!
|
|
Listed: 7/12/2010 QA Manager
|
|
|
 |
CALSTAR
United States
Job Location: California
|
Lcraine@calstar.org
|
CALSTAR QA Manager
Location: McClellan, CA
Position Summary
Quality Assurance Manager is responsible for the planning, supervision, and direction of the Quality Assurance Department. Responsible to ensure that all CALSTAR aircraft are maintained to the highest quality standards in accordance with the Federal Aviation Administration regulations, and approved company policies and procedures.
Bachelors Degree or equivalent from a college or technical school; or 2-4 years related experience preferred. A&P Mechanic (IA Preferred) with 3-5 years experience in a quality department of an FAA certified Part 145 Repair Station or a FAA Part 135 Air Carrier. Successful candidate must possess previous leadership/supervisory experience; 3-5 years. Basic knowledge of business processes required along with strong communication skills.
Must have knowledge of a variety of computer software applications including; Microsoft Word, Excel and Outlook. Successful candidate should be able to multi-task, prioritize and exhibit devoted attention to detail. Must work well in a team environment, be self-motivated, safety conscious, and possess the ability to communicate with employees in a clear, concise, and professional manner.
Please send resumes to: Lcraine@calstar.org
or fax to: (916) 921-4067
CALSTAR is an equal employer opportunity
|
|
Listed: 7/7/2010 Experienced Mechanics
|
|
|
 |
Idaho Helicopters Inc.
2471 Commerce Ave.
Boise, Idaho 83705
United States
Job Location: Idaho
|
Contact: Send resumes to Steve Sandmeyer Direcor of Operations
steves@idahohelicopters.com
Ph: 208-344-4361
Fx: 208-345-6719
idahohelicopters.com
|
Idaho Helicopters is seeking two experienced mechanics. One is for the position of "Chief Inspector" for a 145 Certified Repair Station. The second position is for a shop mechanic who can also travel with a Bell 205 when it is on a fire contract. Both are full time, year round.
We are located in Boise, Idaho and operate Bell 205's, 430's, 429's, 206L3's, and a MD 900.
We have been a 135 operator since 1970. Operations include EMS, government contracting such as fire fighting and multiple ageny resource projects, longline and charter.
Our maintenance facility, both library and shop, are modern and emphasize safety and efficiency
Experience with FAA, Forest Service and AMD inspectors is desirable. Opportunities exist for factory schools and continuing education. We also offer a competitve benefit package that shows our commitment to long term employement. |
|
Listed: 7/2/2010 A&P Mechanic
|
|
|
 |
PHI, Inc.
P.O. Box 90808
Lafayette, Louisiana 70509
United States
Job Location: Indiana
|
resumes@phihelico.com
Fx: 337-272-4232
www.phiairmedical.com
|
PHI Air Medical
A&P Mechanic
West Lafayette, IN
WORK SCHEDULE/LOCATION:
· 7&7 schedule
· Successful applicants will be required to live within 1 hour of West Lafayette, IN
QUALIFICATIONS/EXPERIENCE NECESSARY:
· A&P License
· 5 Years Total Helicopter Experience
· 2 Years Field Experience
· EC-135 & 407 Experience Preferred
· EMS Experience Preferred
· Interview & acceptance with PHI Air Medical Maintenance Manager.
· Relocation package available (Requires 2 year commitment if accepted)
Please send resume to resumes@phihelico.com or fax to 337-272-4232. Please indicate "West Lafayette" position in your response.
|
|
Listed: 7/1/2010 Rotor Aircraft Base Technician
|
|
|
 |
CALSTAR
4933 Bailey Loop, California 95652
United States
Job Location: California
|
Contact: Loren Craine
lcraine@calstar.org
|
California Shock Trauma Air Rescue (CALSTAR) is a nonprofit regional air ambulance service. Our mission is to save lives, reduce disability and speed recovery for victims of trauma and illness. CALSTAR has an immediate opening for a full time:
Base Aircraft Technicians in Gilroy/Salinas, CA
AIRCRAFT = MD 902/ Bell 222
- A Base Mechanic is responsible for ensuring program aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies, and good practices.
Qualifications:
- Ensures aircraft is maintained in an airworthy condition.
- Ensures aircraft, ground support equipment, and work areas are maintained to company standards of cleanliness and appearance.
- Ensures all required maintenance manuals and documents are in order.
- Coordinates with Director of Maintenance (or designee) to ensure timely acquisition of parts and tooling.
- Ensures efficient scheduling of field maintenance.
- Ensures all maintenance records are accurate and in accordance with applicable FARs and company policies.
- Ensures company maintenance records are submitted to the Quality Assurance Department in a timely manner.
- Ensures program parts and supplies inventory is accurate and sufficient.
- Ensures accountability for all expendable items.
- Ensures all used core parts, unneeded new parts, and support equipment is returned to the proper departments in a timely manner.
- Attends monthly base staff meetings.
- Attends quarterly maintenance department meetings.
- Performs other duties as assigned by the Director of Maintenance (or designee).
Requirements:
- FAA Airframe and Power plant certificate as prescribed by FAR 65.
- High school diploma or GED.
- Associates degree preferred.
- Must meet recent experience requirement of FAR 65.83.
- At least 2 years experience maintaining rotary wing aircraft, and turbine engines.
- Factory or equivalent training on the assigned make and model aircraft preferred.
- Must be knowledgeable of FARs, General Operations Manual, Safety Program, and assigned aircraft maintenance manuals.
- Maintain harmonious and cooperative relations with the program members, other company members, patients and guests.
- Maintains confidentiality of information deemed confidential.
- Communicates effectively with pilot and medical teams.
- Effective oral and written communication skills.
- Sound judgment and objectivity in decision-making.
- This position requires the ability to work days, nights, weekends, scheduled days off, overtime and to be on-call.
Environment:
The assigned work environment may include hospitals and/or airports. The expected environment includes outdoor operations in most all weather condition during all times of the day or night.
Selected Candidates must be able to pass a drug test.
Relocation Assistance might be available for the right candidate. Excellent benefits package, Medical, Dental and Vision, Profit Sharing Plan, and Life Insurance.
Please send your resume to:
LCraine@calstar.org
or fax to: (916) 921-4025
CALSTAR is an equal employer opportunity
|
|
Listed: 6/30/2010 MH-47 Subject Matter Expert - Avionics/Electrical/Armament
|
|
|
 |
Reliance Aerotech Services
1161 Murfreesboro Pike Ste 410
Nashville, Tennessee 37217
United States
Job Location: Kentucky
|
Contact: Mitch Williamson
mwilliamson@relianceaerotech.com
Ph: 6156270741
Fx: 6156270743
|
Reliance Aerotech Services is currently looking for a Subject Matter Expert with extensive experience with MH-47G avionics/electrical modifications and installs. This position would be located at Ft. Campbell, KY and would last approximately 5 weeks starting on July 19th, 2010. Lodging will be provided.
Duties: Perform electrical repairs/installs, sensor alignments (boresighting), vibrating (RAP) testing, and Quality Assurance required to repair a damaged MH-47G aircraft. Material for repairing/correcting and installing new wiring where needed from STA 51 forward on the aircraft will be provided. Damaged wires include: set of Times Microwave Cables. Perform AASE sensor alignments(boresights) to include the SIRFC system, FLIR system, and the MMR Pod. Also will perform MMR Pod alignments to all other aircraft needing such.
Requirements: Extensive MH-47 electrical experience AASE sensor alignments(boresights)experience is required Must provide your own tools Training Certifications A&P is a plus
Compensation: The pay rate has not been set for this as of this posting. Contact a recruiter immediately if you are qualified and interested.
We offer a cafeteria style benefit package that includes medical, dental, vacation and 401K plan
Application Instructions: For further details and to be considered please contact the recruiters at (866)622-5086, email your resume in MS Word document format to Resumes@relianceaerotech.com, or fax your resume to (615)627-0743 or (850)941-2004
Reliance Aerotech Services Inc. is an equal opportunity employer.
|
|
Listed: 6/28/2010 A&P Mechanic
|
|
|
 |
PHI, Inc.
P.O. Box 90808
Lafayette, Louisiana 70509
United States
Job Location: Indiana
|
resumes@phihelico.com
Ph: 337-235-2452
Fx: 337-272-4232
www.phiairmedical.com
|
PHI Air Medical
A&P Mechanic
Danville, IN
QUALIFICATIONS/EXPERIENCE NECESSARY:
· A&P License
· 5 Years Total Helicopter Experience
· 2 Years Field Experience
· 407 & EC-135 Experience Preferred
· EMS Experience Preferred
· Interview & acceptance with PHI Air Medical Maintenance Manager.
WORK SCHEDULE/LOCATION:
· 5&2 work schedule
· Successful applicants will be required to live within 1 hour of Danville, IN
· Relocation package available (Requires 2 year commitment if accepted)
Please send resume to resumes@phihelico.com or fax to 337-272-4232
|
|
Listed: 6/24/2010 MRO Quality Inspector
|
|
|
 |
Columbia Helicopters
United States
Job Location: Oregon
|
applicant@colheli.com
www.colheli.com
|
Columbia Helicopters, Inc located 22 miles south of Portland, OR is in search of an MRO Quality Inspector.
Responsible to perform the inspections necessary to assure all maintenance performed is in accordance with the applicable manufacturer’s instructions, applicable regulations and customer requirements. Performs final inspection functions on aircraft articles. May also perform preliminary, hidden damage or receiving inspections as authorized. Performs inspections utilizing unaided sight or visual aids, special tooling or precision measuring equipment to ensure work performed meets quality and airworthiness standards, and has been accomplished in accordance with the appropriate data, defined processes, and applicable regulations. Reviews maintenance work record documentation ensuring accuracy to work scope, defined processes and applicable regulations. Reviews and updates specific aircraft records as required according to work performed. Acts as a team member representing MRO quality control on integrated product teams (IPT). Works collaboratively with all quality and shop operations department personnel regarding matters of inspection, process, issue identification and resolution. Utilizes Lean continuous improvement tools and constantly strives to identify and eliminate waste (in all its forms) in an effort to improve quality/safety, decrease lead time and reduce cost. Uses the proper problem solving techniques to address issues. Suggests changes and improvements or updates to procedures related to inspection processes and the quality management system.
Requires a high school diploma or equivalent, further education or advanced instruction relative to technical field is desirable. Minimum technical experience requirement is 5 years of aircraft maintenance; additional experience in component overhaul is preferred. Systems experience and understanding of the Columbia 107, Columbia 234 and like military aircraft is preferable. Aerospace manufacturing experience is desirable. Must be familiar with the products and processes associated with aircraft and aircraft component maintenance and manufacturing inspection processes. Must meet the requirements of FAR 145.155 and be appropriately certificated per FAR Part 65. Must have or the ability to obtain maintenance release as applicable and all MRO inspection authorizations. Must be able to meet ITAR compliance.
The successful candidate will be solution oriented, exhibit excellent communication skills and have the ability to work with and contribute to a team. They will have a thorough understanding of repair station procedures, quality management systems and procedures (MRO and manufacturing) and associated federal aviation regulations. Must be able to read, interpret and apply various technical data such as prints, specifications, aircraft manuals and regulations, use specialized inspection and hand tooling as required to perform job functions. Ability to use a computer operating system and standard business software to include MS office suite. Must be willing to conduct oneself in accordance with the company’s core values.
Benefits package. Pre-employment drug test and background check required. Mail, fax or email resume & cover to: Columbia Helicopters, Inc., Attn: Human Resources, P.O. Box 3500, Portland, OR 97208; fax(503) 678-6985; applicant@colheli.com. EOE. Open until filled.
Please mention this position in your cover letter. |
|
Listed: 6/24/2010 Operator Quality Inspector
|
|
|
 |
Columbia Helicopters
United States
Job Location: Oregon
|
applicant@colheli.com
www.colheli.com
|
Columbia Helicopters, Inc. located 22 miles south of Portland, OR is in search of an Operator Quality Inspector.
Responsible for providing support of Quality Department interface with CHI operating certificates, both domestic and foreign. Provides proactive support of programs used for the maintenance/inspection and continuing analysis of CHI aircraft, including both domestic and foreign operations; functional support of field operations, including visits to the field (for training purposes and verification of effectiveness of maintenance/inspection programs).
Supports field maintenance personnel that are assigned to perform training for the operator. Participates as a team member for field approval development and technical publications review with respect to operator concerns as delegated by the Operator Quality Manager. Maintains knowledge and expertise of National Aviation Regulations, guidance material, and other relevant information pertinent to CHI’s operating certificates (domestic and foreign).
Coordinates as directed with other departments regarding activities associated with field maintenance concerns, inspects aircraft structures and/or aircraft airframe systems and parts (such as mechanical flight control, hydraulic, and fuel systems) following a defined inspection program and utilizing visual inspection techniques or inspection aids (such as precision measuring equipment).
Requires a high school diploma or equivalent, further education or advanced instruction relative to technical field is desirable. Must have A&P certification, 14 CFR Part 65.91 Inspection Authorization is desirable.
Minimum of 5 years documented technical aerospace experience and 2 consecutive years of experience in a heavy-lift helicopter field-maintenance environment (preferably in management) and a valid state driver’s license are required.
The successful candidate will be solution oriented, exhibit excellent communication skills and have the ability to work with and contribute to a team. They will project a positive customer focus to the CHI organization as well as outside customers. Must be able to read, interpret and apply various technical data such as prints, specifications, aircraft manuals and regulations, use specialized inspection and hand tooling as required to perform job functions assigned as well as have extensive knowledge of the Federal aviation regulations Title 14 Air & Space and CHI aircraft maintenance/inspection programs. Must be willing to travel and work in foreign countries as required to perform job functions.
Benefits package. Pre-employment drug test and background check required. Mail, fax or email resume & cover to: Columbia Helicopters, Inc., Attn: Human Resources, P.O. Box 3500, Portland, OR 97208; fax(503) 678-6985; applicant@colheli.com. EOE. Open until filled.
Please mention this position in your cover letter. |
|
Listed: 6/23/2010 Project Manager
|
|
|
 |
Heli-One
Fort Collins, Colorado
United States
Job Location: Colorado
|
holly.gold@chc.ca
|
Give Your Career a Vertical Lift! At any given moment, on any given day, a CHC aircraft is in the air somewhere in the world. Whether we're transporting the men and women who keep the world's offshore oil and gas flowing, or taking an injured patient to safety, CHC sets the standard for safety, customer service, modern aircraft and efficiency. This is a billion-dollar business built on the foundation of a strong team spirit in our company and our greatest strength is our motivated and passionate employees. All you have to do is get on board.
This position manages assigned projects from preparation of estimates/offers, through planning and design phase, into production, delivery and invoicing. Responsible for managing the project and resources to meet span time commitments, quality expectations, cost budgets and customer satisfaction.
Responsibilities:
Lead the estimating process for new opportunities
Work with sales to support customers for agreement of the Statement of Work
Works with the Planner and the Department Managers to develop the project plan, resource requirements and allocation and milestone charts
Conduct pre-check meeting with assigned staff and support personnel prior to induction of the aircraft
Ensure execution of the schedule, including design, parts supply and production.
Monitor and direct activities of planning, purchasing and crew chiefs assigned to projects
Meet the budget, as agreed with the customer
Ensure workplace safety and workmanship quality on the project
Work with Director and Department Managers to resolve resource conflicts
Identify key issues that may impact project cost or schedule and escalates for resolution when beyond the control of the Business Unit
Provide regular customer updates on project progress; hosts customers during visits and ensure acceptance crew and air crew are looked after during test period.
Provide regular management updates on project progress: schedule, man-hours, and cost
For sub-contracted work, negotiate subcontractor agreements and conduct daily project status via teleconference or on-site; ensures resources are available to support the contractor (design, planning and materiel)
Conduct post-check meetings to evaluate project performance, provide recognition and identify improvement areas
Identify continuous improvement opportunities and contribute to the development of improved business processes
Manage SQID reports related to projects; conduct Corrective and Preventive Action Analysis, establish root causes and develop corrective measures to deal with customer feedback, acceptance and audit findings
International travel may be required
May perform other duties as assigned
Qualifications & Experience: Required:
A University Degree or equivalent education, training and experience
A minimum of 5-7 years of relevant experience
Experience in successful leading and managing in a manufacturing environment, with a proven track record
Experience or training in Project Management techniques and processes
Ability to think strategically and at the same time be a hands-on manager
Self motivated and results oriented
Excellent listening, verbal, and written communication and presentation skills
Excellent collaborative problem solving skills with an ability to envision a system wide solution
Ability to lead in a rapidly evolving and dynamic environment
Demonstrated team player with excellent interpersonal skills Desired:
Base Maintenance management experience within a global environment.
Please apply ONLINE at www.heli-one.ca to be considered for this position. Heli-One is committed to equal opportunity employment and invites applications from all qualified candidates. We thank all candidates for their interest, however, only those who meet the qualifications will be contacted. Sorry, no phone calls please! |
|
Listed: 6/21/2010 Helicopter Mechanic - City of LA
|
|
|
 |
City of Los Angeles
United States
Job Location: California
|
NOEMAILS@lacity.org
|
ANNUAL SALARY
$77,109 - $77,109 (flat-rated)
A 5.5% bonus is paid for possessing an FAA Inspection Authorization. Some positions require night work, for which a higher salary is paid.
DUTIES
A Helicopter Mechanic inspects, repairs, overhauls, services, cleans and returns all City-owned helicopters to service, including those of the Fire and Police Departments.
NOTE: Helicopter Mechanics must be available to work weekends and holidays.
REQUIREMENTS
1. Three years of full-time paid experience, two years of which must have been within the past three years, as a licensed Airframe and Power Plant Mechanic engaged in performing work on turbine powered helicopters such as the Bell 407, Bell 206 series, Bell 412, American Eurocopter AS 350 B2, or similar models. Qualifying experience must include the following:
-all manufacturers' scheduled inspections; and
-electrical and mechanical, repair, and troubleshooting activities; and
-sheet metal repairs on air frames; and
-major component overhaul.
2. In addition to the regular City application, all candidates are required to complete the Helicopter Mechanic Supplemental Information Form (click here to download).
Candidates who lack six months or less of the required experience may file for this examination. However, they cannot be appointed until the full experience requirement is met.
LICENSE: A valid mechanical license with Airframe and Power Plant ratings issued by the Federal Aviation Administration is required at the time of filing your City employment application, and a copy must be submitted with the application.
NOTE: A Helicopter Mechanic is required to furnish hand tools.
SUPPLEMENTAL INFORMATION FORM
In addition to the regular City application form, each candidate is required to submit a Helicopter Mechanic Supplemental Information Form, which details the candidate's background and level of experience in working on various helicopters.
WHERE TO APPLY
APPLICATIONS WILL ONLY BE ACCEPTED ON THE CITY APPLICATION FORM. You may apply on-line at https://personline.lacity.org/job_app/, or you may download a paper application at http://per.lacity.org/application.pdf and send it by mail to the Personnel Department Building only. Please do not mail applications to the "drop box" locations listed below.
Paper applications are accepted only when advertised on the job bulletin. Applications may also be obtained and submitted at the following locations:
Personnel Department Building
700 East Temple Street, Room 100,
Los Angeles, CA 90012
Monday through Friday
7:00 a.m. until 5:00 p.m.
(213) 473-9311
TDD (213) 473-9312
Van Nuys City Hall (Drop Box)
14410 Sylvan Street, Room 105,
Van Nuys, CA 91401
Monday through Friday
8:30 a.m. until 4:30 p.m.
Constituent Services Center (Drop Box)
8475 South Vermont Avenue,
Los Angeles, CA 90044
Monday through Friday
8:00 a.m. until 5:00 p.m.
Cypress Park Community Center (Drop Box)
929 Cypress Avenue,
Los Angeles, CA 90065
Monday through Friday
8:00 a.m. until 5:00 p.m.
APPLICATION DEADLINE
Filing will remain open until sufficient applications are received and may close at any time without specific prior notice. For administrative purposes, filing may close periodically and reopen the following working day.
For the complete job description, please use the following link: http://personline.lacity.org/job_list/jobs.htm
|
|
Listed: 6/15/2010 FIELD HELICOPTER MECHANIC
|
|
|
 |
Aris Helicopters Jobs
6873 Flight Road
Riverside, California 92504
United States
Job Location: California
|
Contact: Kelly Liken
Arisjobs@aol.com
Ph: No Calls
Fx: 951-359-5019
Arishelicopters
|
FIELD HELICOPTER MECHANIC
Aris Helicopters Immediate opening for a Field Helicopter Mechanic to support the Fire Fighting helicopter operations in the field and at our headquarter office in Riverside, California, Sikorsky S-58 Helicopter Experience A Must, (Bell 206 / AS-350 / Sikorsky S-58T) Travel Out Of Town For Long & Short Durations,
Job Duties:
- Performs all maintenance in accordance with applicable regulatory, manufacturer‘s and company regulations, policies and procedures.
- Maintain aircraft to the highest standards possible.
- Maintain aircraft in excellent aesthetic condition.
- Maintain ground support equipment, and work areas in a clean and organized manner.
- Maintain aircraft publications and documents in a current revision status.
- Schedule maintenance in an efficient and organized manner which maximizes aircraft availability.
Required Qualifications:
- FAA Airframe and Powerplant Certificate.
- High School graduate or equivalent.
- 3 years commercial rotorcraft maintenance experience.
- Knowledgeable of the Federal Aviation Regulations.
- Excellent troubleshooting skills.
- Excellent communication and interpersonal skills.
- Must be available for on call
- Possesses sound judgment and objectivity in decision-making
- Basic computer skills.
Please Send Your Résumé To: Arisjobs@aol.com
|
|
Listed: 6/15/2010 BASE / LEAD MECHANIC FOR PART 145 REPAIR STATION
|
|
|
 |
Aris Helicopters Jobs
6873 Flight Road
Riverside, California 92504
United States
Job Location: California
|
Contact: Kelly Liken
Arisjobs@aol.com
Ph: No Calls
Fx: 951-359-5019
Arishelicopters.com
|
|
BASE / LEAD MECHANIC FOR PART 145 REPAIR STATION
LOCATION = San Jose, California
A Base/Lead Mechanic is responsible for ensuring aircraft are maintained to airworthiness standards prescribed by applicable regulations, airworthiness directives, company policies, good practices and a team player.
|
Job Duties:
- Performs all maintenance in accordance with applicable regulatory, manufacturer‘s and company regulations, policies and procedures.
- Maintain aircraft to the highest standards possible.
- Maintain aircraft in excellent aesthetic condition.
- Maintain ground support equipment, and work areas in a clean and organized manner.
- Maintain aircraft publications and documents in a current revision status.
- Schedule maintenance in an efficient and organized manner which maximizes aircraft availability.
Required Qualifications:
- FAA Airframe and Powerplant Certificate.
- High School graduate or equivalent.
- 3 years commercial rotorcraft maintenance experience.
- Knowledgeable of the Federal Aviation Regulations.
- Excellent troubleshooting skills.
- Excellent communication and interpersonal skills.
- Must be available for on call
- Possesses sound judgment and objectivity in decision-making
- Basic computer skills.
Preferred Qualifications:
- EC-120 experience.
- EC-120 Factory School.
- Bell 206 / MD 500 / AS-350
Please email your resume to Arisjobs@aol.com | |
|
Listed: 6/10/2010 Fire Contract A&P
|
|
|
 |
Helicopter Express
United States
Job Location: Idaho
|
Contact: Bruce Runyan
bruce@helicopterexpress.com
|
| A & P FOR FIRE CONTRACT IN NORTHERN IDAHO, MUST HAVE CDL LICENSE, BELL 407, CONTRACT IS FROM 6/15/2010 TO 9/22/2010, E-MAIL RESUME TO bruce@helicopterexpress.com OR FAX (770)458-2571 |
|
|
|
|
|